Basic Info.
Model NO.
SM-WB-120
Touch Screen
Without Touch Screen
Sorting Method
Lever
Speed Range
0~120km/H
Detection Accuracy
Total Weight Error ≤7%
Detection Standard
GB/T21296-2007 10 Level
Load Capacity
Axle Load 30 Tonnes, Overload Capacity 200%
Bending Plate Sensor Protection Grade
IP68
Installation Mode
Road Surface Shallow Surface Inlay Installation, E
Output Detection Information
Axle Weight, Total Weight, Vehicle Speed, Number O
Transport Package
Wooden Box
Specification
customisable
Trademark
Sun-Moon
Origin
China
HS Code
9031809090
Production Capacity
300, 000pieces/Year
Product Description
Product Description:
Bending Plate Vehicle Weighing Systems are high-tech devices that use a bending plate load cell as a sensitive element to measure the mass of a moving vehicle. Due to the low dead weight and fast response time of the bending plate load cell, it is possible to measure the mass of a moving vehicle up to a maximum speed of 200 km/h. Installation is extremely easy as only a 70*40 cross-section trench needs to be cut, and once installed it blends in with the road surface and is virtually maintenance free.
Product system components :
Product technical parameters:
Product Application Diagram:
Cooperation case:
Bending Plate Vehicle Weighing Systems are high-tech devices that use a bending plate load cell as a sensitive element to measure the mass of a moving vehicle. Due to the low dead weight and fast response time of the bending plate load cell, it is possible to measure the mass of a moving vehicle up to a maximum speed of 200 km/h. Installation is extremely easy as only a 70*40 cross-section trench needs to be cut, and once installed it blends in with the road surface and is virtually maintenance free.
Product system components :
| 1. Bend plate sensors | 2-4 per lane. |
| 2. Data Acquisition Controller | Receive the weighing signal from the curved plate sensor and analyse the data after high-speed sampling to form the weighing information such as wheel weight and send it to the computer for processing. to the computer for processing. |
| 3. Main control computer | Receive data from data acquisition controller, comprehensively analyse and form multi-lane vehicle weight, licence plate, speed and other information, combined with law enforcement software to form a complete system. The company provides users with dynamic link library (.dll) form. Each .dll file corresponds to one controller. |
Product technical parameters:
| 1. Accuracy level: | 5 levels for the whole vehicle, depending on the number of sensors. |
| 2. Sensors that can be connected to the controller: | Maximum number 8 |
| 3.Test speed: | 1-200km/h (Theoretical value. Due to the limitations of road conditions, the actual maximum speed of measurement to be achieved by the measurement of technical departments of the test report shall prevail. Vehicle speed changes when passing the vehicle will cause additional errors in the equivalent amount, so too low a test speed (such as (10km / h) will not be able to ensure that the allowable speed and thus cause a large error.) |
| 4. Maximum weighing capacity (axle weight): | 30 tonnes |
| 5.Minimum weighing capacity: | 1000kg |
| 6.Graduated value: | 100kg |
| 7.Rated working temperature: | -10ºC--40ºC |
| 8.Power supply: | AC220V/50HZ |
| 9.Execution standard: | GB/T21296-2007 (because the system does not allow static weighing, GB/T21296-2007 standard in the following terms and corresponding test methods are not suitable for this system: 5.1.4, 5.1.12, 5.1.13, 5.2.4, 5.2.10, 5.2.11) |
Product Application Diagram:
Cooperation case:
